5b358d71c1
Replace the monolithic useQueryToolData composable and nested Vue component tree with a modular architecture: useLotResolve, useLotLineage, useLotDetail, and useEquipmentQuery. Introduce ECharts TreeChart (LR orthogonal layout) for lot lineage visualization with multi-select support, subtree expansion, zoom/pan, and serial number normalization. Add unified LineageEngine backend with split descendant traversal and leaf serial number queries. Archive the query-tool-rewrite openspec change and sync delta specs to main. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
153 lines
8.0 KiB
Markdown
153 lines
8.0 KiB
Markdown
## ADDED Requirements
|
|
|
|
### Requirement: Query-tool page SHALL use tab-based layout separating LOT tracing from equipment queries
|
|
The query-tool page SHALL present two top-level tabs: "LOT 追蹤" and "設備查詢", each with independent state and UI.
|
|
|
|
#### Scenario: Tab switching preserves state
|
|
- **WHEN** the user switches from LOT tab to Equipment tab and back
|
|
- **THEN** the LOT tab SHALL retain its resolved lots, lineage tree state, and selected lot detail
|
|
- **THEN** the Equipment tab SHALL retain its query results independently
|
|
|
|
#### Scenario: URL state reflects active tab
|
|
- **WHEN** the user is on a specific tab
|
|
- **THEN** the URL SHALL include a `tab` parameter (e.g., `?tab=lot` or `?tab=equipment`)
|
|
- **THEN** reloading the page SHALL restore the active tab
|
|
|
|
### Requirement: QueryBar SHALL resolve LOT/Serial/WorkOrder inputs
|
|
The query bar SHALL accept multi-value input (newline or comma-separated) with input type selection and resolve via `POST /api/query-tool/resolve`.
|
|
|
|
#### Scenario: Successful LOT resolution
|
|
- **WHEN** the user enters lot IDs and clicks resolve
|
|
- **THEN** the system SHALL call `POST /api/query-tool/resolve` with `input_type` and `values`
|
|
- **THEN** resolved lots SHALL appear as root nodes in the lineage tree
|
|
- **THEN** not-found values SHALL be displayed as warnings below the tree
|
|
|
|
#### Scenario: Work order expansion
|
|
- **WHEN** the user enters work order IDs (max 10)
|
|
- **THEN** each work order MAY expand to 100+ lots
|
|
- **THEN** all expanded lots SHALL appear as root nodes in the lineage tree
|
|
|
|
#### Scenario: Input validation
|
|
- **WHEN** the user submits empty input or exceeds limits (50 lot IDs, 50 serial numbers, 10 work orders)
|
|
- **THEN** the system SHALL display a validation error without making an API call
|
|
|
|
### Requirement: LineageTree SHALL display as a decomposition tree with progressive growth animation
|
|
After resolve completes, the lineage tree SHALL auto-fire lineage API calls for each resolved lot with concurrency control, rendering an animated tree that grows as results arrive.
|
|
|
|
#### Scenario: Auto-fire lineage after resolve
|
|
- **WHEN** lot resolution completes with N resolved lots
|
|
- **THEN** the system SHALL automatically call `POST /api/trace/lineage` for each lot
|
|
- **THEN** concurrent lineage requests SHALL be limited to 3 at a time
|
|
- **THEN** the lineage tree SHALL render root nodes immediately (resolved lots)
|
|
|
|
#### Scenario: Progressive tree growth animation
|
|
- **WHEN** a lineage API response returns for a lot
|
|
- **THEN** ancestor nodes SHALL animate into the tree (slide-in + fade, staggered 30-50ms per sibling)
|
|
- **THEN** the animation SHALL give the visual impression of a tree "growing" its branches
|
|
|
|
#### Scenario: Tree node expand/collapse
|
|
- **WHEN** the user clicks a tree node with children (ancestors)
|
|
- **THEN** children SHALL toggle between expanded and collapsed state
|
|
- **THEN** expand/collapse SHALL be a client-side operation (no additional API call)
|
|
|
|
#### Scenario: Expand-all and collapse-all
|
|
- **WHEN** the user clicks "全部展開"
|
|
- **THEN** all tree nodes at all levels SHALL expand with staggered animation
|
|
- **WHEN** the user clicks "收合"
|
|
- **THEN** all tree nodes SHALL collapse to show only root nodes
|
|
|
|
#### Scenario: Merge relationships visually distinct
|
|
- **WHEN** the lineage data includes merge relationships
|
|
- **THEN** merge nodes SHALL display a distinct icon and/or color to differentiate from direct ancestor relationships
|
|
|
|
#### Scenario: Leaf nodes without expand affordance
|
|
- **WHEN** a tree node has no ancestors (leaf/terminal node)
|
|
- **THEN** it SHALL NOT display an expand button or clickable expand area
|
|
|
|
#### Scenario: Lineage cache prevents duplicate fetches
|
|
- **WHEN** lineage data has already been fetched for a lot
|
|
- **THEN** subsequent interactions SHALL use cached data without re-fetching
|
|
- **WHEN** a new resolve query is executed
|
|
- **THEN** the lineage cache SHALL be cleared
|
|
|
|
### Requirement: Left-right master-detail layout SHALL show tree and LOT detail side by side
|
|
The LOT tracing tab SHALL use a left-right split layout with the lineage tree on the left and LOT detail on the right.
|
|
|
|
#### Scenario: LOT selection from tree
|
|
- **WHEN** the user clicks any node in the lineage tree (root lot or ancestor)
|
|
- **THEN** the right panel SHALL load detail for that node's container ID
|
|
- **THEN** the selected node SHALL be visually highlighted in the tree
|
|
|
|
#### Scenario: Right panel sub-tabs
|
|
- **WHEN** a LOT is selected
|
|
- **THEN** the right panel SHALL display sub-tabs: 歷程 (History), 物料 (Materials), 退貨 (Rejects), Hold, Split, Job
|
|
- **THEN** each sub-tab SHALL load data on-demand when activated (not pre-fetched)
|
|
|
|
#### Scenario: Responsive behavior
|
|
- **WHEN** the viewport width is below 1024px
|
|
- **THEN** the layout SHALL stack vertically (tree above, detail below)
|
|
|
|
### Requirement: LOT History sub-tab SHALL display production history with workcenter filter
|
|
The History sub-tab SHALL show production history data from `GET /api/query-tool/lot-history` with workcenter group filtering.
|
|
|
|
#### Scenario: History table display
|
|
- **WHEN** the user selects the History sub-tab for a LOT
|
|
- **THEN** the system SHALL call `GET /api/query-tool/lot-history?container_id=X`
|
|
- **THEN** results SHALL display in a table with sticky headers and horizontal scroll
|
|
|
|
#### Scenario: Workcenter group filter
|
|
- **WHEN** the user selects workcenter groups from the filter dropdown
|
|
- **THEN** the history query SHALL include the selected groups as filter parameters
|
|
- **THEN** the history table SHALL refresh with filtered results
|
|
|
|
### Requirement: LOT Production Timeline SHALL visualize station progression over time
|
|
The History sub-tab SHALL include a timeline visualization showing the lot's journey through production stations.
|
|
|
|
#### Scenario: Timeline rendering
|
|
- **WHEN** lot history data is loaded
|
|
- **THEN** a horizontal Gantt-style timeline SHALL render with time on the X-axis
|
|
- **THEN** each workcenter/station SHALL appear as a track with a colored bar from track-in to track-out time
|
|
|
|
#### Scenario: Workcenter filter affects timeline
|
|
- **WHEN** the user filters by workcenter groups
|
|
- **THEN** the timeline SHALL show only stations matching the selected groups
|
|
- **THEN** filtered-out stations SHALL be hidden (not grayed out)
|
|
|
|
#### Scenario: Timeline event markers
|
|
- **WHEN** hold events or material consumption events exist within the timeline range
|
|
- **THEN** they SHALL be displayed as markers on the timeline with tooltip details on hover
|
|
|
|
### Requirement: LOT Association sub-tabs SHALL load data on-demand
|
|
Each association sub-tab (Materials, Rejects, Holds, Splits, Jobs) SHALL fetch data independently when activated.
|
|
|
|
#### Scenario: Association data loading
|
|
- **WHEN** the user activates a sub-tab (e.g., Materials)
|
|
- **THEN** the system SHALL call `GET /api/query-tool/lot-associations?container_id=X&type=materials`
|
|
- **THEN** results SHALL display in a table with dynamic columns
|
|
|
|
#### Scenario: Sub-tab data caching within session
|
|
- **WHEN** the user switches between sub-tabs for the same LOT
|
|
- **THEN** previously loaded sub-tab data SHALL be preserved (not re-fetched)
|
|
- **WHEN** the user selects a different LOT
|
|
- **THEN** all sub-tab caches SHALL be cleared
|
|
|
|
### Requirement: Each sub-tab SHALL support independent CSV export
|
|
Every detail sub-tab SHALL have its own export button.
|
|
|
|
#### Scenario: Per-tab export
|
|
- **WHEN** the user clicks export on the Materials sub-tab
|
|
- **THEN** the system SHALL call `POST /api/query-tool/export-csv` with `export_type: "lot_materials"` and the current container_id
|
|
- **THEN** a CSV file SHALL download with the appropriate filename
|
|
|
|
#### Scenario: Export disabled when no data
|
|
- **WHEN** a sub-tab has no data loaded or the data is empty
|
|
- **THEN** the export button SHALL be disabled
|
|
|
|
### Requirement: Legacy dead code SHALL be removed
|
|
The legacy `frontend/src/query-tool/main.js` (448L vanilla JS) and `frontend/src/query-tool/style.css` SHALL be deleted.
|
|
|
|
#### Scenario: Dead code removal
|
|
- **WHEN** the rewrite is complete
|
|
- **THEN** `frontend/src/query-tool/main.js` SHALL contain only the Vite entry point (createApp + mount)
|
|
- **THEN** `frontend/src/query-tool/style.css` SHALL be deleted (all styling via Tailwind)
|